 31 Clinton Avenue, Norwich, CT 06360. USA  +1 860-823-3090

piezo based print solutions

The high resolution iM2 printer provides a versatile, cost-effective solution to meet the need for variable data printing on a range of coated and uncoated substrates. Capable of printing addresses, barcodes, 2D codes, QR codes, numbering, logos and graphics, the iM2 is suitable for mailing and addressing applications, as well as labels, tickets, security, plastic cards and business form applications.

 

The very small footprint and modular design of the iM2 means that it is easily and quickly integrated into mailing lines, webs and card lines. With all the printer electronics and ink delivery systems built into the Printhead assembly, it is designed for maximum uptime.

 

  • Very small footprint
  • Supports up to 600dpi print resolution
  • High speed capability - up to 1000ft/min at 300dpi
  • Print ready in under 5 minutes

high quality, high speed

compact size

premium capability at a
lower cost

The iM2 supports up to a 600 dpi resolution giving you maximum quality at all times; there is little that cannot be printed  with incredible sharpness.

 

For all your graphics and mail applications the IM2 is capable of ultra fast speeds to meet your productivity goals.

One of the key design mandates for the iM2 was a small footprint. Not only is the Printhead compact, so is the interface enclosure. For the first time, trying to find space on your equipment for bulky ink handling systems and print heads is no longer a concern.

 

When utilizing multiple heads to get wider format capability this is especially important and the iM2 is a solid winner ensuring that whatever available space you have, the iM2 can fit!

 

Minimal  Footprint

  • Head:        12.4” x 3.8” x 6.5”
  • Enclosure:    12.1” x 5.7” x 8.1”

Print shops are constantly striving to remain competitive and differentiate themselves. An iM2 printer allows them to stay ahead of the market by implementing a highly cost effective print solution.

The iM2‘s initial cost is significantly lower than other solutions, but goes beyond just a  hardware cost. Factoring in reduced maintenance, efficient use of inks, and  reliability, the iM2 has a  low Total Cost of Ownership.

 

This decrease in cost does not come at reduced capability or quality. The iM2 is a solid performer cable of very high throughputs and incredible clarity and durability of print.

ease of use

groundbreaking design

software that delivers

With decades of experience in the graphics and mail markets, inc.jet has a wealth of knowledge to build on in developing print solutions that are simple to integrate and easy to operate. In fact, the Piezo based iM2 is as easy to use as a TIJ based printer.

 

Start up—Print ready can be achieved within five minutes, and job changeover is possible within seconds.

 

Print head purging—With print head mounting brackets moving between offline purging and printer ready position, fast make ready can be achieved effortlessly.

 

 

Simplicity is the key to the iM2 Design.  From the Patented Ink Delivery system to the Electronics, Housing and interface connectors, the iM2 has been designed with ease of use in mind.

 

The iM2 uses a single pump and sensor to measure the ink pressure and to pump the ink directly from the supply to the print head as ink is being consumed while printing.  Since there is no air reservoir for meniscus control there are no issues with ink flow, or flooding air sensors or valves (there are none).

 

With the head mounted directly to the manifold, the design greatly reduces the number of connections, tubes and failure points where leaks can occur.

The iM2 incorporates an integrated manifold heater that can preheat the ink before it reaches the head allowing the ink to flow better and operate much more reliably at higher speeds, resulting in less nozzle outs.

 

The head can be changed in the field without disassembling the ink delivery system and or any of the ink delivery connections.  The system can be installed, primed and operational in less than 1 hour.

 

 

Simplicity is the key to the iM2 Design.  From the Patented Ink Delivery system to the Electronics, Housing and interface connectors, the iM2 has been designed with ease of use in mind.

 

The iM2 uses a single pump and sensor to measure the ink pressure and to pump the ink directly from the supply to the print head as ink is being consumed while printing.  Since there is no air reservoir for meniscus control there are no issues with ink flow, or flooding air sensors or valves (there are none).

 

With the head mounted directly to the manifold, the design greatly reduces the number of connections, tubes and failure points where leaks can occur.

The iM2 incorporates an integrated manifold heater that can preheat the ink before it reaches the head allowing the ink to flow better and operate much more reliably at higher speeds, resulting in less nozzle outs.

 

The head can be changed in the field without disassembling the ink delivery system and or any of the ink delivery connections.  The system can be installed, primed and operational in less than 1 hour.

 

 

© 2019 All Rights Reserved                                  |   Privacy Policy   |   About inc.jet    |

+1 860-823-3090
+1 860-823-3090

Powerful and effective

cooperation lasting for years

31 Clinton Avenue, Norwich, CT 06360. USA +1 860-823-3090  
 CONSTRUCT